Arisaka Type 99 Cleaning Rod Removal

The Arisaka Type 99 cleaning rod removal is a procedure that is necessary to maintain the reliability of an Arisaka Type 99 rifle. This process involves the removal of the cleaning rod from the rifle in order to clean and lubricate the bore and other parts of the rifle. This procedure is not difficult but requires attention to ensure the rifle is properly maintained.

Moreover, the Arisaka Type 99 cleaning rod removal process can be completed in a relatively short amount of time with the proper tools and knowledge. So today, I am going to discuss this whole matter.

 

Is the Arisaka Type 99 A Good Gun?

The Arisaka Type 99 is generally considered to be a good gun. It was used by the Japanese military during World War II and it is known for being reliable and well-made.

  • It is popular among gun collectors.
  • It is still praised for its accuracy and solid construction.

 

Why Is It Called Type 99 Arisaka?

The Type 99 Arisaka was named after its designer, Colonel Nariakira Arisaka, who headed the Japanese Army’s Small Arms Research Committee in 1897.

The rifle was officially adopted by the Japanese Army in 1939. And it was designated as the “Type 99 Rifle”.

 

Type 99 Cleaning Rod

The Type 99 Cleaning Rod is a type of gun cleaning rod designed for use with the Japanese Type 99 Arisaka rifle, which was used during World War II.

  • The rod is made of steel and is typically divided into three sections, with a threaded tip that screws into the muzzle of the rifle.
  • It has a loop at the end of the rod that can be used to attach a cleaning patch or cloth.

How Long Is A Type 38 Cleaning Rod?

The Type 38 cleaning rod is 15.75 inches (40 cm) long.

 

Arisaka Type 99 Cleaning Rod Removal

  1. Make sure the gun is unloaded.
  2. Inspect the cleaning rod to make sure it is secure in the gun. If not, use a flathead screwdriver to loosen the screw on the cleaning rod holder.
  3. After loosening the screw, pull the cleaning rod out of the gun.
  4. Then you should carefully hold the cleaning rod and pull it away from the gun slowly.
  5. You may need to use some force to remove the rod from the gun.
  6. Also, be careful not to damage any parts of the gun during this process.

How Does The Cleaning Rod Release Work On A Type 99 Arisaka?

The cleaning rod release on a Type 99 Arisaka is a small button located at the rear of the trigger guard.

  • If you want to release the cleaning rod, then press the button in and slide the rod out.

What To Do When Cleaning Rod Won’t Fit?

If the cleaning rod won’t fit into the barrel, there are a few things you can try.

  • First, check to make sure the rod is the correct size for the barrel. If it is, you may need to use a lubricant like gun oil or a silicone spray to help the rod slide in more easily.
  • You could also try gently tapping the rod into the barrel with a rubber mallet or a plastic hammer. If that doesn’t work, you may need to use a specialized tool like a cleaning rod extension or a bore guide to help guide the cleaning rod into the barrel.

 

Other FAQs:

How To Open AK 47 Cleaning Kit?

To open an AK-47 cleaning kit, begin by unzipping the kit and then removing the various components from the bag.

  • After opening the kit, using a flathead screwdriver, carefully remove the fasteners that hold the cleaning rod together.
  • Next, insert the cleaning rod in the muzzle of the AK-47 and twist it to loosen the rod.
  • After that, you can use a pair of pliers to unscrew the cleaning rod from the muzzle.
  • Finally, use the included cleaning brushes to clean the interior of the AK-47.

How To Take The Cleaning Rod Out Of AK 47?

  • Make sure the firearm is unloaded and the magazine is removed.
  • Pull back the bolt and lock it open.
  • Loosen the cleaning rod retainer cap located at the front of the rifle using a flathead screwdriver.
  • Pull the cleaning rod out of the retainer cap.
  • Reassemble the rifle and store it in a safe place.

How Do Remove The Cleaning Rod AK 47?

To remove the cleaning rod from an AK-47, you will need to first take off the muzzle protector, if there is one. You should then be able to use a small screwdriver or other tools to loosen the two screws holding the cleaning rod in place. And when the screws are removed, you can then slide the cleaning rod out from the muzzle protector.

 

Conclusion

The Arisaka Type 99 cleaning rod removal is a relatively simple procedure that requires minimal tools. The cleaning rod can be safely removed from the rifle in a matter of minutes with a firm grip and steady hands. As with all firearms maintenance, it is important to read and understand all instructions before attempting any repairs or modifications. Because following these steps can ensure that the cleaning rod is removed safely without any bad incidents.