How To Clean a 1911 Kimber? – Cleaning & Storage Of 1911 Kimber

The 1911 Kimber is a classic and beloved handgun. Whether you use it for protection, target shooting, or hunting, it’s always vital to keep it clean and well-maintained. Cleaning your 1911 Kimber is a relatively simple process. In my article, I will provide a step-by-step guide on how to properly clean, oil, and store your 1911 Kimber.

 

How Often Should You Clean Kimber 1911?

You should clean your Kimber 1911 after every range session or after every 500 rounds fired, whichever comes first.

Is A Kimber 1911 A Quality Gun?

Yes, Kimber 1911s are generally considered to be high-quality guns. They are well-made and reliable firearms and have a good reputation among gun owners.

 

What You’ll Need to Clean Your 1911 Kimber?

  1. Soft cloth
  2. A toothbrush or small brush
  3. Gun cleaning solvent
  4. Gun oil
  5. Cotton swabs
  6. Q-tips
  7. Gun cleaning patches
  8. Toothpicks
  9. Cleaning rod
  10. Gun cleaning jag
  11. Gun cleaning bore brush

 

Disassembling Your 1911 Kimber for Cleaning

  • Remove the magazine and ensure the chamber is empty.
  • Remove the slide from the frame.
  • Remove the recoil spring and the recoil spring guide.
  • Remove the barrel bushing.
  • Pull the barrel out of the slide.
  • Remove the firing pin and extractor.
  • Remove the thumb safety.
  • Remove the slide stop.
  • Remove the hammer pin.
  • Remove the hammer.
  • Remove the trigger pin.
  • Remove the trigger.
  • Remove the sear pin.
  • Remove the sear.
  • Remove the grip safety.
  • Remove the mainspring housing.
  • Clean all components with a gun cleaning solution and a soft cloth.
  • Reassemble the 1911 Kimber in reverse order.

 

How To Clean a 1911 Kimber?

  1. Begin by disassembling your Kimber 1911. To do this, remove the grip screws and separate the slide from the frame. Then, remove the slide stop, extractor, recoil spring, and guide.
  2. When the gun is disassembled, use a toothbrush and some gun cleaning solvent to clean the frame, slide, and all other parts. Focus on the parts that are more likely to contain dirt, such as the nooks and crannies of the slide, the frame rails, and the barrel.
  3. Once the parts have been thoroughly cleaned, use a dry cloth to remove any excess solvent.
  4. Apply a small amount of gun oil to the frame and slide rails, as well as the breach, extractor, and any other moving parts.
  5. Reassemble the gun, making sure all parts are securely in place.
  6. After reassembling the gun, use a soft cloth to wipe down the exterior of the gun, removing any oil or dirt that may have been missed during the cleaning process.
  7. Inspect the gun to make sure everything is in working order and ready for use.

How to Properly Oil Your 1911 Kimber?

  1. Unload your 1911 Kimber and ensure the chamber is empty.
  2. Wipe down the entire firearm with a clean cloth to remove any dust, dirt, or other debris.
  3. Apply a light coat of oil to the entire gun, including the slide and frame.
  4. Rub the oil into the firearm with a clean cloth.
  5. Use a Q-Tip to apply a light coat of oil to the barrel and other hard-to-reach areas.
  6. Wipe off any excess oil with a clean cloth.
  7. Reassemble your 1911 Kimber and check for proper functioning.

 

Best Practices for Cleaning a 1911 Kimber

  1. Unload your 1911 Kimber: Make sure your 1911 Kimber is unloaded before beginning the cleaning process.
  2. Disassemble your 1911 Kimber: Take your 1911 Kimber apart and lay out all of the parts on a clean surface.
  3. Clean the outside of the frame: Use a soft cloth to clean the outside of the frame, removing any dirt and debris.
  4. Clean the inside of the frame: Use a cleaning brush and gun cleaning solvent to clean the inside of the frame.
  5. Clean the barrel: Use a bore brush and gun cleaning solvent to clean the barrel.
  6. Clean the slide: Use a cleaning brush and gun cleaning solvent to clean the slide.
  7. Clean the magazine: Use a cleaning brush and gun cleaning solvent to clean the magazine.
  8. Reassemble your 1911 Kimber: Put all of the parts back together and make sure everything is functioning correctly.
  9. Lubricate your 1911 Kimber: Apply a light coat of gun oil to all of the moving parts of your 1911 Kimber.
  10. Test fire your 1911 Kimber: Test fire your 1911 Kimber to make sure everything is functioning correctly.

 

Tips for Troubleshooting Common 1911 Kimber Issues

  1. Inspect the magazine for proper fit and function. The magazine should fit snugly into the magazine well and lock securely into place.
  2. Inspect the recoil spring and guide rod for wear or damage.
  3. Ensure the slide stop is properly installed and functioning.
  4. Ensure the slide is properly lubed and that the slide is cycling the rounds properly.
  5. Check the barrel and chamber for debris or burrs that may be preventing the round from seating properly.
  6. Ensure all safety features are functioning properly.
  7. Check the trigger for proper function and reset.
  8. Ensure the sights are properly adjusted and that the sights are not loose.
  9. Check the extractor for proper tension and fit.
  10. Check the firing pin for proper fit and function.

 

Where Do You Lubricate A Kimber 1911?

Lubrication should be applied to the slide rails, barrel hood, barrel lug, and anywhere else metal parts move or rub against each other.

How to Reassemble Your 1911 Kimber?

  1. Start by reinstalling the slide stop. Insert the slide stop from the left side of the gun, and push it all the way in until it seats.
  2. Next, re-install the recoil spring and plug. Make sure that the recoil spring is properly seated in the recoil spring tube and that the plug is properly seated in the slide.
  3. Then, insert the barrel and link into the slide. Make sure that the barrel lugs are properly aligned with the slide.
  4. Now insert the barrel bushing. Make sure that the barrel bushing is fully seated and that the barrel lugs are properly aligned with the slide.
  5. Test the gun to ensure that it is functioning properly. If everything looks and works properly, then you have successfully reassembled your 1911 Kimber.

 

Maintain Your 1911 Kimber Over Time

  1. Clean your 1911 Kimber regularly. Cleaning your gun is essential in keeping it in good condition. Use a quality cleaning kit, and give your gun a thorough cleaning every few months. This will keep the parts in good condition and help keep your gun functioning properly.
  2. Inspect your 1911 Kimber for any signs of wear or damage. Look for any signs of rust, cracks, or excessive wear on the metal parts. Inspect the frame and slide for any signs of damage.
  3. Lubricate your 1911 Kimber regularly. Apply a thin layer of gun oil to the internal components of your gun to help prevent rust and corrosion.
  4. Store your 1911 Kimber in a safe and dry place. Do not store your gun in a damp or humid environment as this could lead to rust and corrosion.
  5. Have your 1911 Kimber serviced regularly by a qualified gunsmith. This will help to ensure that your gun is functioning properly and that all parts are in good condition.

 

Store Your 1911 Kimber Safely

  1. Always keep your 1911 Kimber unloaded in a gun safe when not in use.
  2. Make sure the gun safe is made of heavy-duty steel and is securely fastened to the floor or wall.
  3. Store the unloaded 1911 Kimber in a gun safe with any other firearms and ammunition stored separately.
  4. Use a gun lock to secure the gun safe and the 1911 Kimber when it is not in use.
  5. Make sure the 1911 Kimber is stored away from any children or unauthorized individuals.
  6. Store the 1911 Kimber in a cool, dry place away from direct sunlight.
  7. Regularly clean and inspect your 1911 Kimber to ensure it is in proper working order.
  8. Take your 1911 Kimber to a professional for regular maintenance and repairs.

 

Final Words…

When it comes to cleaning and maintaining a 1911 Kimber, you have to remember regular maintenance. Moreover, cleaning is essential to ensure the gun remains in good working condition.

It is important to use the correct cleaning products and techniques, as well as take extra care of the more delicate components. Because only then, your 1911 Kimber will remain a reliable and accurate firearm for years to come with some patience and attention.