An ammonia-based copper solvent gun cleaner is a powerful cleaning solution that is used to remove copper oxide and other deposits from gun barrels. It is designed to penetrate deeply into the rifling of the barrel, leaving behind a smooth, clean surface. This cleaner is easy to use and provides an effective means of keeping gun barrels clean and free from buildup. And today I will discuss ammonia-based copper solvent gun cleaner to resolve your all doubts. So. let’s start our journey.
What Is Gun Wash Solvent?
Gun wash solvent is a cleaning solution specifically designed for firearms.
- It is designed to remove carbon, lead, and copper build-up from inside the barrel and other parts of the gun.
- It is also designed to dissolve powder residue so that it can be easily wiped away.
What Is Gun Cleaning Solvent Made Of?
Gun cleaning solvent is typically made of petroleum-based chemicals such as kerosene, mineral spirits, and naphtha.
Some gun cleaning solvents may also contain lubricants, rust inhibitors, and other ingredients that can help clean and protect the firearm.
Ammonia Based Copper Solvent Gun Cleaner
The ammonia-based copper solvent gun cleaner is a type of gun cleaning solution used to clean and lubricate firearms. It is made up of a combination of ammonia, water, and a variety of detergents, surfactants, and other cleaning agents.
- It is used to dissolve copper and other fouling deposits from the bore and other areas of the gun. And help to restore the firearm to its original condition.
- An ammonia-based copper solvent gun cleaner is also used to lubricate moving parts and protect them from corrosion and wear.
Note:
The ammonia-based copper solvent gun cleaner should only be used with proper safety precautions due to its caustic properties. And it should never be used on wooden or polymer gun stocks.
Using Ammonia Based Copper Solvent Gun Cleaner
- You should start by disassembling your firearm and removing all ammunition.
- Now place the parts in a container and fill the container with enough ammonia-based copper solvent to cover the parts. And allow the parts to soak for at least one hour.
- You can use an old toothbrush or other soft-bristled brush to scrub the parts to remove any fouling or dirt.
- After that, rinse the parts off in warm, soapy water and dry them thoroughly.
- Now re-assemble the firearm and lubricate it as necessary.
- At last, store the ammonia-based copper solvent in a cool, dry place away from children and pets.
Ammonia for Cleaning Rifle Barrels
It is not advisable to use ammonia for cleaning rifle barrels. Because ammonia can cause corrosion of the metal, which can lead to damage to the barrel.
- There are other solvents and cleaners that are better suited for cleaning rifle barrels.
Ammonia for Cleaning Stainless Steel
Ammonia is not suitable for cleaning stainless steel as it can strip away the protective layer and cause corrosion. Instead, you can use mild detergent and warm water to clean stainless steel.
- If there are stubborn stains, you can use a soft cloth or a non-abrasive sponge with some white vinegar or rubbing alcohol.
- But be sure to rinse with warm water and dry with a soft cloth afterward.
Best Ammonia Based Copper Solvent Gun Cleaners
- Hoppe’s No. 9 Copper Solvent
- Outers Copper Solvent
- Birchwood Casey Gun Scrubber Synthetic Safe
- M-Pro 7 Copper Remover
- Breakthrough Clean Military-Grade Solvent
- Shooter’s Choice Copper Remover
- Ballistol Multi-Purpose Cleaner
- Remington Oil-Based Bore Cleaner
- CLP by Sage & Braker
- Slip 2000 Carbon Killer Copper Remover
Does Hoppes 9 Solvent Remove Copper?
Yes, Hoppes 9 solvent can remove copper fouling from firearms. It contains ammonia, which helps break down the copper and other deposits, while petroleum distillate helps to dissolve the copper.
- The solvent works to loosen the copper particles and then wash them away.
- Hoppes 9 is known to be one of the best solvents for removing copper fouling and it is highly recommended by many gunsmiths.
But What Is The Best Gun-Cleaning Solution?
The best gun cleaning solution depends on the type of firearm and the type of cleaning being done. Generally, a good quality gun cleaning solvent is the best solution for cleaning a firearm.
- Common gun cleaning solvents include Hoppe’s No. 9, Shooter’s Choice, Break-Free CLP, and Ballistol.
Other Relevant FAQs:
What Cleans Copper The Fastest?
The fastest way to clean copper is to use a combination of vinegar and salt.
- Mix equal parts white vinegar and salt.
- Then use a cloth or sponge to rub the mixture onto the copper.
- Finally, rinse with water and dry to reveal a sparkling clean surface.
Can You Use CRC to Clean Your Gun?
No, you should not use CRC to clean your gun. Because CRC is a chemical compound that is used to protect metal surfaces against corrosion. So it should not be used to clean firearms as it can damage the gun.
What Does The Military Use to Clean Guns?
The military uses a variety of cleaning implements and solvents to clean guns, such as a bore brush, bore snake, cleaning rod, patch holder, cleaning jag, cleaning patches, gun oil, and solvents.
What Material Is Best for Gun Cleaning Patches?
Most gun cleaning patches are made from cotton, though some are made from polyester, flannel, or other materials.
Cotton is the most common material used for gun cleaning patches, as it is absorbent. And it won’t leave behind lint or fibers that could potentially damage the firearm.
Is Hydrogen Peroxide Good for Cleaning Guns?
No, hydrogen peroxide is not recommended for use as a cleaning solvent for guns. Because it is too corrosive and can damage the metal parts of the firearm.
What Is The Strongest Bore Cleaner?
The strongest bore cleaner available on the market is Hoppe’s No. 9 Bore Cleaner. This product is designed to quickly and effectively remove powder, lead, and metal fouling from gun barrels. It is the preferred choice of professional gunsmiths and competitive shooters.
What Does WD-40 Do to Copper?
WD-40 is not recommended for use on copper or brass surfaces. It can cause corrosion and discoloration.
Before I Go
The Ammonia-Based Copper Solvent Gun Cleaner is an effective and safe solution for cleaning firearms. It has been proven to be effective in removing stubborn copper fouling from firearms without damaging the metal or the finish. Furthermore, it is easy to use, relatively affordable, and can be stored for long periods of time without deteriorating. For all of these reasons, it is a great choice for cleaning your firearms.
